Boiler Room Equipment: HeatSponge SIDEKICK Eventually Exposed

Boiler Room Equipment, Inc, is very pleased to eventually introduce the SIDEKICK type of condensing boiler economizers for industrial and conventional warm water boilers. Fisher Capital on Boiler Room Equipment, Inc, - The Sidekick continues to be in advancement for almost a couple of years and shows an transformative growth of high-proficiency installations in the boiler market. The SIDEKICK is a warning game changer the likes of which have not been knowledgeable since the launch of the very first condensing boilers. The SIDEKICK provides the capability to combine condensing boiler efficiencies to conventional boilers on a new or retrofit basis. The SIDEKICK enables a person with a conventional boiler system the power to recognize condensing efficiency gains that normally would demand the existing boiler to be destroyed and changed with a brand new condensing boiler. Conventional, non-condensing boilers can now realize the efficiency benefits of outdoor air temperature reset controls and lower circulating hot water loop temperatures. Sidekicks also allow for duel fuel condensing applications utilizing conventional boilers. The SIDEKICK features all stainless internal construction, stainless tubes and fins, and an insulated outer casing. Inspection and clean out ports make periodic maintenance and cleaning easy.

The effectiveness of the SIDEKICK moves far beyond simply energy retrieval to the ultra-productive procedure by which it really is chosen and created. Temperature recovery for condensing purposes presents a substantial quantity of variables that creates a catalog-approach to products collection nearly impossible. Boilerroom Equipment has developed a new method of quantifying heat recovery, the Recovery Rate, and integrated this into the design. The development of the Recovery Rate variable permits a customer to customize the level of heat recovery and cost straight to the specifications of each particular application. We establish this fresh idea in heat recovery design as 3D Modularity, for modular construction in three dimensions. Based on a "Mass-Customization" approach to product development, Bruce will consider all of the application design constraints and will design a SIDEKICK enhanced to satisfy the exact overall performance needs at the most reasonably competitive selling price. Bruce has been given the ability to consider all aspects of the heat exchanger design relative to the price of the equipment and generate a fully priced proposal all in real-time; a software and engineering accomplishment that added over one thousand hours of coding and heat transfer modification to Bruce's core program. This means Bruce can handle all inquiries and generate proposals in real time by himself. The near elimination of sales and support overhead and significantly reduced project execution overhead requirements the Bruce software provides allows us to offer a product superior to any before it at pricing and responsiveness levels no conventional competitor could hope to match.

New Commercial Boilers Presented - Triad Boiler Room Systems by Fisher Capital

Fisher Capital on Boiler Room Equipment, Inc: Triad Boiler Systems creates distinctively tough small-footprint hot water boilers, steam boilers, and radiant heating systems.

All of our boilers use 12 gauge firetubes in compact vessels that suit through very small doorways! Inputs range up to 2,000,000 BTU's. Create a highly efficient system with millions of BTU's by sequencing a string of these modular vessels.

TRIAD's commercial boilers and industrial grade Hot Water Heating, Domestic Hot Water, and Steam boilers are used in a wide variety of applications. Our commercial boilers are used at schools, universities, apartments, hospitals, office buildings, retirement communities, and churches. Industrial uses have included bakeries, smelting operations, food processing, quenching systems, and various heating applications for manufacturing. Triads’ modular boilers and radiant heating systems can be natural gas fired, oil fired, or dual fuel fired. For simplicity of operation and maintenance, all controls on our boilers are well known, off-the-shelf products. There area no proprietary parts on these boilers! This simplicity of operation is part of our philosophy, and an important reason why our customers return to us again and again.

TRIAD has been manufacturing high-quality boilers since 1926, and developed the modular boiler concept with primary/secondary piping, receiving a patent for it in 1967. We put this experience, knowledge, and expertise into every boiler.

We believe in quality - it is the overriding characteristic driving our company. This is why we manufacture extremely rugged, well-designed hot water and steam boilers that can provide decades of dependable service. We welcome your inquiries.

Benefits of Modularity

TRIAD's elegantly simple design maintains consistent water volume where heat is required.

•             Boilers are activated sequentially, drawing water from the main loop into the next hot water boiler until the heating need is meet.

•             firing boilers remaining isolated, so no heated water circulates through cold boilers.

•             During most of the year the unfired boilers provide additional backup.

•             Outdoor temperatures and loop water temperatures are constantly monitored.

Fisher Capital on Boiler Room Equipment, Inc: The efficiency of this design is most apparent during warmer months, when a conventional hydronic heating or steam boiler could still be operating at full capacity.

Primary-Secondary Piping - TRIAD integrates modularity with a single pipe primary-secondary system. TRIAD was the first company to employ a Primary-Secondary concept. It operates with two loops, (i) the primary loop, or building main loop, and (ii) smaller secondary loops off of each hot water boiler, which supply heated water to the primary loop.

Upon a call for heat, the boiler pump begins pushing the return water into the boiler and out through the secondary loop, supplying this hot water up into the primary loop (the main header), where it mixes with the cooler return water from the main loop of the building.

•             Supply and return water are blended, avoiding the need for expensive and unreliable mixing valves commonly used in two pipe systems.

•             The secondary loop isolates each hot water boiler, resulting in a very efficient system that minimizes thermal shock.

Control Panel

TRIAD Boilers can be sequenced by the use of our control panel that provides many attractive features:

•             Temperature set-back when less heat is required, such as nights and weekends.

•             Adjustments for latent heat, to take advantage of hot boiler water that retains heat after the burner shuts down.

•             Outdoor reset based on atmospheric temperatures.

•             Monitoring of return water temperatures to maintain accurate heating output.

It is also very easy to sequence our boilers using the panel of any other major manufacturer.

Packaged Product - Fisher Capital on Boiler Room Equipment, Inc: All TRIAD hot water boilers and steam boilers are fully assembled, packaged products, which offer several advantages over boilers that must be assembled at the jobsite

•             Onsite labor costs are minimized.

•             Quality control is higher at the factory than at the jobsite

•             The ease of installation of a packaged boiler allows for quicker start up.

Benefits of Steel Boilers

Easy to Clean - To maintain boiler efficiency, heating surfaces must be kept clean and free of combustion by-products. All TRIAD heating surfaces, especially the firetubes, are easy to access. It is impossible to clean all the heating surfaces of a cast iron boiler, and what can be reached is difficult to clean.

TRIAD also makes it easy to maintain clean water surfaces. The cleaning of the interior of a cast iron boiler is a major undertaking, and even then only the vertical surfaces can be cleaned. The inability to clean the horizontal surfaces can have a significant impact on operating efficiency.

Easy to Repair - Because of their steel construction, TRIAD hot water and steam boilers can be repaired in the field with minimal disruption. A leak can be permanently welded or the tubes re-rolled with little difficulty. It is impossible to permanently weld a cracked cast iron boiler section or a leaking copper fin-tube boiler. The firetubes are easily accessed through the top and through the firedoor.

Fast Water Circulation - Poor circulation of water within the typical cast iron boiler is very common due to their design limits, while TRIAD's steel hot water boilers provide for faster circulation.

Fisher Capital Management - Japan Elects a New Premier Part 1

Fisher Capital Management Eight and a half months after riding the Democratic Party of Japan’s

(DPJ) historic lower house victory into office, Prime Minister Yukio

Hatoyama announced his resignation, having haphazardly frittered

away a chest brimming with political capital.

Major newspapers said that Hatoyama was resigning mainly for

two reasons: his failure to keep his promise to relocate the functions

of US Marine Corps Air Station Futenma, Okinawa, out of Okinawa

Prefecture, and a political funding scandal that included his mother’s

provision of some ¥1.26 billion to him over years.

Following Hatoyama’s resignation, Minister of Finance Naoto Kan

was elected as the new Prime Minister, the fifth in four years.

At his inaugural press conference Kan proposed a comprehensive

reconstruction of the economy, public finance, and social security

as his priority, in addition to reforming public administration, and

conducting responsible diplomatic and defence policy.

Fisher Capital Management Report- Japan Elects a New Premier Part 1: The biggest question surrounding the once-popular new government

is whether Kan can really turn over a new leaf for the DPJ. In his

first policy speech to the Diet as prime minister, Kan sought to set

his administration apart from the previous one by vowing to build

“a strong economy, strong finances and strong social welfare”.

Kan stressed the need to jolt Japan out of its currently weak state,

which he attributed to “anaemic economic growth, ballooning

public debt and dwindling public trust in the viability of Japan's

social security system”.

Observers and practitioners believe that the government is unlikely

to announce any significant new policy initiatives, as Kan was

already one of the main architects behind the previous

administration’s economic policy, although some changes have just

been announced in the DPJ election manifesto for the Upper House

election. For instance it drops the promise of doubling monthly

child allowances to ¥26000 next year.

“I hope to carry over the torch of rebuilding Japan passed on to

me by Hatoyama”, he observed at a press conference after his

election. Alan Feldman, chief economist at Morgan Stanley in Japan,

says that “although Kan’s initial speech did include some new

elements, the main message was continuity with Hatoyama’s

economic policies. Investors are likely to welcome the innovations,

but to remain sceptical of the overall philosophy”.

However, economists believe Kan will face a mountain of challenges

both at home and abroad in the near future. First, he needs to

rebuild that political capital ahead of the upper house elections.

Public support for the DPJ has recovered sharply after his

appointment suggesting that voters have, for now, forgiven the

ruling Democrats for the previous leaders’ policy mistakes.

But it remains to be seen whether the initial popularity of the Kan

administration will translate into a strong performance, and whether

Kan will ultimately be given a strong enough mandate to push

through difficult policy decisions.

Major newspaper polls give Prime Minister approval ratings of

between 60 and 70 percent; but such ratings can be very fickle.

The election will be an uphill battle for the DPJ. The DPJ is without

one of its coalition partners, the Social Democratic Party who left

the ruling camp over Hatoyama’s failure to remove the US base

from Okinawa, as demanded by its leader, Mizuho Fukushima.

The two parties that remain, the DPJ and the People’s New Party,

hold 122 of the upper house’s 242 seats, the slimmest majority

possible. Should the coalition lose that majority in the coming

election, it would mean a split Diet — its majority would only

remain in the lower house. And that would make passing bills

extremely difficult.

Fisher Capital Management Report- Japan Elects a New Premier Part 1: Kan will have plenty on the economic front too. In terms of fiscal

policy, as a former Finance minister he has turned into a fiscal

conservative, having been a champion of funnelling revenue from

higher taxes toward government spending in order to achieve

economic growth. “Economic growth, fiscal reconstruction and

social welfare reform will be achieved together”, he told reporters.